Draco Extended Arm Set for HPI Savage
Add an additional 12.7mm (0.5 inches) of width each side to your HPI Savage with the Draco Extended Arm Set. Designed to work with the stock shocks and suspension parts, everything you need is included to make the conversion. Improve your Savage`s handling and stability as well as enjoying a smoother and quieter driveline with the included 136mm Dogbones.
WARNING: Are NOT compatible with the Draco CVDs
Features:
No modifications necessary, simply install
Increases overall width by 25.4mm (12.7mm per side)
Improves stability at higher speeds
Improved handling at higher speeds
Arms are machined from PA6-GF15 black nylon
Includes four carbon fibre inserts and four plastic inserts
Includes machined hardened alloy steel 136mm dogbones
Includes a hardened alloy steel turnbuckle so you can utilise the stock Savage upper arms
Included Items:
DRA-231 Extended Arm (4)
DRA-232 11x136mm Dogbone (4)
DRA-233 M5x40mm Turnbuckle (4)
DRA-234 Carbon Fibre Insert (4)
DRA-235 Plastic Insert (4)
DRA-0305FS M3x5mm Flathead Screws (40)
Exploded View
Overview:
-
![]()
Draco Extended Arm Set (Complete)
DRA-230 Draco Extended Arm Set (Complete)
With three bundles available choose the best option for you with Bundle 1 includes 4 plastic and 4 carbon inserts, Bundle 2 eight carbon inserts and Bundle 3 has eight plastic inserts.
-
![]()
Extended Arm
DRA-231 Extended Arm
Machined from PA6-GF15 black nylon, the arms are stiff but flexible enough to handle impacts. With the added carbon fibre or plastic inserts you can fine tune your set up, to reduce or increase stiffness.
-
![]()
135mm Dogbone
DRA-232 135mm Dogbone
Featuring 90 degree out of phase pins, the 135mm dogbones have reduced vibrations. By offsetting the pins any velocity variations are not synched, so any vibrations and noise are no longer amplified. This makes for a quieter and smoother driveline with lower wear on the dogbones.
Made from alloy steel and then hardened making them impact resistance and tough.
-
![]()
M5x40mm Turnbuckle
DRA-233 M5×40mm Turnbuckle
Included with the Draco Extended Arm Set the M5×40mm Turnbuckles allow you to utilise the stock HPI Savage upper arms (HPI85067) without buying additional parts. These turnbuckles add the additional length needed to use the Extended Arms on your HPI Savage.
Made of hardened alloy steel they are tough and durable for those hard bash sessions.
-
![]()
Carbon Fibre Inserts
DRA-234 Draco Carbon Fibre Insert Set
3mm thick and made of 3K Carbon Fibre, these inserts add rigidity and strength to the extended arms.
Each arm can use up to 2 inserts with plastic options also available for more flex.
-
![]()
Plastic Inserts
DRA-235 Draco Plastic Inserts
Made from 3D printed resin, the plastic inserts are an economical option as well as allowing the extended arms to flex more. Choose your bundle from the drop-down menu in the Draco Store.
